The JFW033 is a 1.4GHz wireless data transmission module featuring high bandwidth, high power, and 2x2 MIMO technology. Built on Time Division Duplex ...
The JFW033 is a 1.4GHz wireless data transmission module featuring high bandwidth, high power, and 2x2 MIMO technology. Built on Time Division Duplex (TDD) principles, it employs key technologies like OFDM and MIMO to enhance bandwidth efficiency while extending transmission range. The module supports automatic frequency hopping and MCS adaptive adjustment, delivering advantages such as long-range capability, strong interference resistance, and low latency. As a highly integrated solution, this product finds extensive applications in drones, security surveillance, wireless screen projection, wireless audiovisual systems, and specialized patrol operations, meeting customers' needs for rapid application development.
The JFW033 operates in both AP and Device modes, enabling stable long-distance wireless communication. The module supports point-to-point and star networking configurations. In star networking mode, a single chip can support wireless transmission between 1 AP and 8 Devices, with multi-chip expansion supporting up to 1:16 node connectivity.
The JFW033 supports ranging between an Access Point (AP) and a Device, with a single measurement error within ±10 meters. Through multiple averaging cycles, the error can be reduced to within ±1 meter. It features a low-power operation mode where modules in AP mode can wirelessly wake up devices operating in Device mode.
Technical Features
Based on the principle of TDD, OFDM and MIMO are adopted to improve the utilization rate of frequency band.
Supports 256QAM/64QAM/16QAM/QPSK/BPSK modulation modes and autonomous dynamic adjustment.
Supports 1.25MHz/2.5MHz/5MHz/10MHz/20MHz/40MHz channel bandwidth and autonomous dynamic adjustment.
Supports AES encryption and multiple security policies to prevent illegal eavesdropping and interception.
The frequency hopping scheme is adopted to monitor the interference in real time and automatically select the frequency hopping range. According to the interference situation of the current channel, the frequency point is rapidly changed and the modulation and coding strategy (MCS) is adjusted.
Support point-to-point and star networking, and can build wireless two-hop networking applications.
Supports 500km/h highly mobile connections.
The maximum rate of air port transmission is 80Mbps.
Supports wireless ranging, the error of a single ranging is within plus or minus 10 meters; after multiple averaging, the error can be reduced to within plus or minus 1 meter.
类别 | 参数 | 描述 |
系统 | 尺寸 | 23x29x2.85mm(含屏蔽罩) |
重量 | 4 克 | |
供电 | DC 5V | |
引脚/封装 | 65 pin/邮票孔(含 9 个 PGND PAD) | |
温度范围 | 工作温度:-40~85℃ | |
存储温度:-40~120℃ | ||
接口 | USB | 1 组 USB 2.0 Host/Device |
RMII | 1 组(仅支持 RMII 和 SDIO 2 选 1) | |
SDIO | 1 组(仅支持 RMII 和 SDIO 2 选 1) | |
DEBUG UART | 1 组 | |
UART | 2 组 | |
I2C、PWM、ADC、I2S、GPIO、SPI | 模块 IO 支持多功能复用,具体需根据应用场景评估、确认 | |
兼容接口 | 接口 pin 2 pin 兼容 P401-D 以及 P401-DAI | |
无线 | 最大发射功率 | 30±1.5dBm 1.4GHz(出厂默认: 28dBm) |
信道带宽 | 1.25MHz/2.5MHz/5MHz/10MHz/20MHz/40MHz | |
调制方式 | BPSK/QPSK/16QAM/64QAM/256QAM | |
收发模式 | 2T2R TDD | |
频道选择 | 自适应跳频200跳 | |
最大传输距离 | 30km(空旷无干扰) | |
无线传输延时 | < 10ms | |
空口速率 | 200Kbps ~ 80Mbps | |
组网方式 | 点对点、点对多点 | |
主芯片 | AR8032S | |
频段 | 1427Mhz~1517MHz |
Contact: James
Phone: Collaboration13554914993
Tel: Product Inquiry17665344694
Email: market@jiffy2016.com
Add: Building 11, Dadu Industrial Zone, Bao'an District, Shenzhen