PA-3060G-70W
Radio frequency parameters
test item | metric | unit | remarks | |
frequency range | 3000-6000 | MHz | ||
working voltage | 32 | V | 28-32 | |
maximumoutput | 70 | W | 70W@7.3A typical value | |
power amplifier efficiency | 30 | % | @70W | |
maximum gain | 45 | db | maximum power gain | |
gain flatness | ≤5 | db | ||
standard input power | 6 | dbm | ||
maximum undisturbed power | ≤10 | dbm | ||
Input port standing wave ratio | ≤2 | No power supply, network partition testing | ||
High and Low Temperature Testing | Work environment temperature (℃) | -10～+55℃ | ℃ | |
power stability | ±1.0@-40℃～+55℃ | dB | ||
Power Supply Requirements | ≥9A@+32Vdc； | Continuous wave output of 70W | ||
Power Supply Interface | Percutaneous capacitor | |||
control communication interface | 485 Communication Protocol TTL communication | Supports temperature, current, voltage detection, and RF output power measurement 2.54mm 2*4 seat sub TTL communication can interface with digital source communication, allowing configuration of digital source frequency bands and output power levels. | ||
Radio Frequency Output Connector | Input SMB-JE, output N mother ， | |||
size | 170*77*24.5 | mm | ||
weight | 750 | g | ||
mounting hole | 152.3*71.5 | mm | M3.0*4 | |
Subscribe to Our Newsletter
Your Email*
*Country*
*Verification code
total 0 Sheet，Only 5 images can be uploaded, each less than 5m.